Juniper-systems Allegro 2 User Guide Bedienungsanleitung PDF herunterladen (Seite 85)

Ch 8 3G Data Modem 81

3. Remove the battery pack.

CAUTION: The Allegro 2 is not sealed against water and

dust when the battery door is not installed.

4. An image on the battery compartment label shows the

correct location and orientation for the mini SIM card.

Pull out the SIM card tray. Place the card onto the tray

and push the tray in until it catches.

To remove the SIM card, pull the tray open and remove

the card. Push the empty tray in until it catches.

5. Replace the battery pack, and attach the battery door.

6. Power on the Allegro 2.

Note: If the modem was on before shutting the Allegro

2 down to insert the SIM card, you are prompted to

congure the data connection when you reboot. See

the instructions on the following pages.

1 2 ... 80 81 82 83 84 85 86 87 88 89 90 ... 118 119

Keine Kommentare

Juniper-systems Allegro 2 User Guide Bedienungsanleitung Seite 85